HP 2x1x16 IP Console Switch User Guide - Page 24
Performing a Velcro-Mount Installation, Configuring the Expansion Module
UPC - 829160890180
View all HP 2x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 HP IP Console Switch User Guide Performing a Velcro-Mount Installation 1. Determine the location for the Expansion Module. 2. Remove the protective strip from one side of the Velcro and attach that side to the Expansion Module. 3. Remove the protective strip from the other side of the Velcro and attach the Expansion Module to the rack frame. Configuring the Expansion Module 1. Mount the Expansion Module into the rack. 2. Locate up to nine UTP CAT5 cables. 3. Connect a UTP CAT5 cable to the server connection port ("Components" on page 7) on the HP IP Console Switch. 4. Connect the other end of that same UTP CAT5 cable to the IN port on the Expansion Module. 5. Connect one end of another UTP CAT5 cable to the OUT port on the Expansion Module. 6. Connect the other end of the second UTP CAT5 cable to the Interface Adapter. 7. Repeat steps 5 and 6 to connect any other servers to this system.