HP 3200se HP PCL/PJL reference - Printer Job Language Technical Reference Adde - Page 16
PJL commands for the 3, 000-sheet stacker, To set the destination to the stacker bin
View all HP 3200se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Note PJL commands for the 3,000-sheet stacker Use the following command sequences for the HP LaserJet 9000 series products with the 3,000sheet stacker accessory (product number C8084A) installed. To set the destination to the stacker bin Use the following command sequence to send the job to the stacker. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=NONE ESC%-12345X To set the destination to the top output bin of the printer Use the following command sequence to send the job to the top output bin of the printer. ESC%-12345X @PJL SET OUTBIN=UPPER @PJL SET FINISH=NONE ESC%-12345X To set the destination to the face-up bin Use the following command sequence to send the job to the face-up bin. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN1 @PJL SET FINISH=NONE ESC%-12345X The default destination is used whenever the PJL OUTBIN variable is not set. To set the default output bin, use the control panel on the front of the product, or use HP Web Jetadmin. 14 Chapter 2 Job Finishing ENWW