HP 3330mfp HP PCL/PJL reference - PCL 5 Comparison Guide - Page 200
Recommendations For Sending Data to the Printer, Ordered Images, Band Sizes
UPC - 088698451328
View all HP 3330mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
process (unlikely, but possible) a white band will be seen on the page. The best way to remedy this situation is to add memory to the printer. Recommendations For Sending Data to the Printer The HP PCL 5 printers perform best in terms of speed and memory utilization if the recommendations made below are followed. Failure to follow these recommendations will not harm the printer, but may increase the chances of a memory out condition or increase the time to print a page. • Ordered Images - Raster Graphic images or pictures should be sent from top to bottom with the data in one band (start raster, end raster pair). If one band is not possible, as few as possible multiple bands may be used as long as they exactly follow each other and are sent in top-to-bottom order. Also, multiple bands should be as large as possible. • Band Sizes - If an image is sent in bands (start raster, end raster pairs), the bands should be multiples of 32 lines high. This is especially critical for landscape graphics. If there is no way to send multiples of 32-line high bands, multiples of four for band height should be used. This allows Image Adapt to work better. 5-4 Memory Usage ENWW