HP 336045-B21 HP IP and Server Console Switches G2 User Guide - Page 24

Connecting the interface adapter

Page 24 highlights

Interface adapter G2 Type serial Part number Prime function console *Not supported for use with ProLiant servers. Optimal use managed devices Connecting the interface adapter NOTE: If you use the HP USB with Virtual Media interface adapter to connect to your ProLiant server, test the functionality of your keyboard and mouse at the BIOS level before you load your operating system. 1. Connect a UTP CAT5 cable to the interface adapter connection port on the console switch. 2. Connect the other end of that same UTP CAT5 cable to the RJ-45 connector on the interface adapter. 3. Connect the interface adapter to the appropriate connectors on the server. 4. Repeat steps 1 through 3 to connect any other servers or appliances to the console switch. The following figure shows an example configuration for the console switch system with an interface adapter. Item 1 2 3 4 Description Server Console switch USB 2.0 interface adapter with Virtual Media PS2 interface adapter with Virtual Media Installing the interface adapter 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

Installing the interface adapter
24
Interface
adapter
Type
Part number
Prime function
Optimal use
G2
serial
console
managed devices
*Not supported for use with ProLiant servers.
Connecting the interface adapter
NOTE:
If you use the HP USB with Virtual Media interface adapter to connect to your ProLiant
server, test the functionality of your keyboard and mouse at the BIOS level before you load
your operating system.
1.
Connect a UTP CAT5 cable to the interface adapter connection port on the console switch.
2.
Connect the other end of that same UTP CAT5 cable to the RJ-45 connector on the interface adapter.
3.
Connect the interface adapter to the appropriate connectors on the server.
4.
Repeat steps 1 through 3 to connect any other servers or appliances to the console switch.
The following figure shows an example configuration for the console switch system with an interface
adapter.
Item
Description
1
Server
2
Console switch
3
USB 2.0 interface adapter with Virtual Media
4
PS2 interface adapter with Virtual Media