HP 3500 HP Jetdirect Print Servers - Administrator Guide - Page 94
Table 3.4, Telnet Commands and Parameters 14 of 18, TCP/IP Configuration 94
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Table 3.4 Telnet Commands and Parameters (14 of 18) trap-dest Enters a host IP address into the HP Jetdirect print server's SNMP trap destination list. The command format is: trap-dest: ip-address [community name] [port number] The default community name is 'public'; the default SNMP port number is '162'. The port number cannot be specified without a community name. To delete the table, use 'trap-dest: 0'. If the list is empty, the print server does not send SNMP traps. The list may contain up to three entries. The default SNMP Trap Destination List is empty. To receive SNMP traps, the systems listed on the SNMP trap destination list must have a trap daemon to listen to those traps. IPX/SPX Settings Command Description ipx-config Enables or disables IPX/SPX protocol operation on the print server. 0 disables, 1 (default) enables. For example, ipx-config 0 will disable IPX/SPX operation. ipx-unitname (Print Server Name) A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By default, the name will be NPIxxxxxx, where xxxxxx are the last six digits of the LAN hardware address. Address (Read-only parameter) Identifies the IPX network and node numbers detected on the network, in the form NNNNNNN:hhhhhhhh (hexadecimal), where NNNNNNNN is the network number and hhhhhhhh is the LAN hardware address of the print server. ipx-frametype Specifies the IPX frame type settings available for your print server model: AUTO (default), EN_SNAP, EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP. For more information, see Chapter 9. ipx-sapinterval Specifies the time interval (1 to 3600 seconds) that the HP Jetdirect print server waits between Service Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables SAP broadcasts. ipx-nds-tree An alphanumeric string, up to 31 characters, that specifies the NDS tree name for the print server. ipx-nds-context An alphanumeric string, up to 256 characters, that specifies the NDS context for the HP Jetdirect print server. ipx-job-poll Specifies the time interval (1 to 255 seconds) that the HP Jetdirect print server will wait to check for print jobs in a print queue. The default is 2 seconds. ipx-banner Enables or disables printing an IPX banner page through Printer Job Language (PJL). 0 disables banner pages. 1 (default) enables banner pages. ipx-eoj Enables or disables IPX end-of-job notification through PJL. 0 disables, 1 (default) enables. ENWW TCP/IP Configuration 94