HP 355 355 G2 Notebook PC and 350 G1 Notebook PC Maintenance and Service Guide - Page 77
Removal and replacement procedures for Authorized Service Provider parts, Component replacement
View all HP 355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6 Removal and replacement procedures for Authorized Service Provider parts CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures This chapter provides removal and replacement procedures for Authorized Service Provider only parts. There are as many as 50 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Top cover Description For use only on computer models equipped with a fingerprint reader For use only on computer models not equipped with a fingerprint reader Spare part number 758051-001 758050-001 Before removing the top cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. Component replacement procedures 67