HP 376227-B21 24-Port 4x Fabric Copper Switch Command Line Reference Guide - Page 110

100 fc srp target Synopsis: To configure targets, enter the fc srp target command in Global Configuration mode. To delete a target from the running configuration, use the no form of this command. Syntax: fc srp target wwpn {description "desc" | ioc-guid guid} no fc srp target wwpn [description | service-name] Table 3-7: fc srp target Command Arguments Argument Description wwpn WWPN of the target port. description desc Applies a text description to the target port. Description to apply to the target port. ioc-guid Manually assigns an I/O Controller (IOC) to the target. guid GUID of the IOC to assign to the target. service-name Configures the service name of the target to an empty string. Platform Availability: Topspin 90, Topspin 360 Command Modes: Global Configuration (config) mode. Privilege Level: Unrestricted read-write user or FC read-write user. Usage Guidelines: Use the fc srp target command to configure target attributes. We recommend that you do not manually create targets. We recommend that you let your gateway card(s) detect targets. The gateway card automatically creates FC-SRP target entries when it discovers targets. Examples: The following example assigns a name to more easily identify the target. Topspin-90(config)# fc srp target 21:00:00:04:cf:75:6b:3b description jumbalya Defaults: The service name serves as the default target name. Related Commands: "fc srp itl" on page 95 "interface" on page 47 "show interface fc" on page 241 "show fc srp initiator" on page 160