Home » HP Manuals » Storage Devices » HP 4000/6000/8000 » Manual Viewer

HP 4000/6000/8000 HP P6000 Enterprise Virtual Array Compatibility Reference (5 - Page 38

Solid state disk SSD support, Array family, Minimum/maximum, number of drives, Vraid level, HP P6000

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

8.0 Solid state disk (SSD) support This table lists feature support for solid state disks. SSDs must be in a separate disk group. For disk drive firmware versions and other general disk drive and XCS support, see the HP P6000 Enterprise Virtual Array Disk Drive Firmware Support document, which is available at: http://www.hp.com/support/manuals. Under storage, select Disk Storage Systems, and then select your array model under P6000/EVA Disk Arrays. Array family1 Minimum/maximum number of drives Vraid level HP P6000 Business Copy HP P6000 Continuous HP P6000 Access DC-Management EVA4400, EVA6400/8400 6/8 Vraid12, Vraid5 All features supported Not supported Extend/shrink not supported 1The 72 GB SSD requires XCS 09500000 or later. The 200 GB and 400 GB SSDs require XCS 09534000 or later. 2Vraid1 requires XCS 09534000 or later. 38

Section	Page
HP P6000 Enterprise Virtual Array Compatibility Reference	1
Introduction	3
1.0 HP P6000 software solution compatibility	4
2.0 HP P6000 Command View interoperability support	5
2.1 HP P6000 Command View upgrade support	8
2.2 HP P6000 Command View downgrade support	9
2.3 HP P6000 Replication Solutions Manager upgrade support	10
2.4 Active/inactive support for P6000 management/replication software	11
2.5 Active/inactive support for controller software	12
3.0 Controller software version support	13
3.1.1 Upgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions	13
3.1.2 Upgrade support for EVA4400 and EVA6400/8400 controller software versions	14
3.2.1 Downgrade support for EVA3000/5000 and EVA4x00/6x00/8x00 controller software versions	15
3.2.2 Downgrade support for EVA4400 and EVA6400/8400 controller software versions	16
3.3 Data-in-place upgrade support for controllers	17
3.4 Controller software version support in remote replication environments	18
3.5 Controller software and management module software support	19
3.6 Management module software compatibility	20
4.0 HP P6000 software deployment options	21
4.1 Supported software on management servers and the management module	22
4.2 Supported P6000 software operating environments	23
4.3 HP P6000 Replication Solutions Manager host agent support	26
4.4 HP P6000 Replication Solutions Manager host agent and HP P6000 DC-Management compatibility	28
4.5 HP P6000 Dynamic Capacity Management compatibility	30
4.6 Features supported by HP P6000 Replication Solutions Manager	31
5.0 Browser support	32
6.0 Features supported by controller software version	33
6.1 Supported array features by controller software version	33
6.2 Supported local replication features by controller software version	34
6.3 Supported remote replication features by controller software version	35
7.0 P6000 EVA host connectivity	37

Match case Limit results 1 per page

8.0 Solid state disk (SSD) support

Array family

Minimum/maximum

number of drives

Vraid level

HP P6000

Business Copy

HP P6000 Continuous

Access

HP P6000

DC-Management

EVA4400,

EVA6400/8400

6/8

Vraid1

, Vraid5

All features supported

Not supported

Extend/shrink not

supported

This table lists feature support for solid state disks. SSDs must be in a separate disk group. For disk drive firmware versions and other general disk drive

and XCS support, see the

HP P6000 Enterprise Virtual Array Disk Drive Firmware Support

document, which is available at:

http://www.hp.com/support/manuals

. Under storage, select

Disk Storage Systems

, and then select your array model under P6000/EVA Disk

Arrays.

The 72 GB SSD requires XCS 09500000 or later. The 200 GB and 400 GB SSDs require XCS 09534000 or later.

Vraid1 requires XCS 09534000 or later.