HP 4310s HP ProBook 4310s Notebook PC and HP ProBook 4311s Notebook PC - Maint - Page 73
from the opening in the top cover., Remove the wireless antenna cables
UPC - 884962405550
View all HP 4310s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and replacement procedures Remove the display assembly: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Remove the WLAN and WWAN antenna cables 1 from the clips 2 built into the base enclosure. 4. Turn the computer display-side up, with the front toward you. 5. Open the computer as far as possible. 6. Disconnect the microphone cable 1 from the system board. 7. Remove the wireless antenna cables 2 from the opening in the top cover. 8. Remove the wireless antenna cables and the microphone cable from the clips 3 and routing channel built into the top cover. 9. Release the grounding tape 4 that covers the wireless antenna cables and microphone cable. 4-28 Maintenance and Service Guide
4–28
Maintenance and Service Guide
Removal and replacement procedures
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Remove the WLAN and WWAN antenna cables
1
from the clips
2
built into the base enclosure.
4. Turn the computer display-side up, with the front toward you.
5. Open the computer as far as possible.
6. Disconnect the microphone cable
1
from the system board.
7. Remove the wireless antenna cables
2
from the opening in the top cover.
8. Remove the wireless antenna cables and the microphone cable from the clips
3
and routing channel built into
the top cover.
9. Release the grounding tape
4
that covers the wireless antenna cables and microphone cable.