HP 4350n HP LaserJet 4250/4350 Series - User Guide - Page 137
The print job is not, formatted correctly., Paper is not fed, correctly or is, damaged.
UPC - 829160415871
View all HP 4350n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
● Check that you ● STOP might have ● Simplify the print ● Check settings in are using the been pressed. job. the printer driver proper printer driver. (See Using the printer driver.) ● Check that the power supplied to the printer is ● Add more memory to the printer. (See ● The data file sent steady, and that it Printer memory.) to the printer might be corrupt. To test, try printing it on another printer (if meets printer specifications. (See Electrical specifications.) ● Turn banner pages off. (See your network administrator.) or program. (The printer driver and program settings override printer control panel settings.) possible), or try a ● Note that slower different file. speeds should be ● Check the interface cable connections. Test the cable by trying it on another computer (if possible). expected if you are printing narrow paper, printing from tray 1, using the HIGH 2 fuser mode, or have set Small Paper Speed to ● Replace the SLOW. interface cable with a high-quality cable (see Part numbers). ● Simplify the print job, print at a lower resolution, or install more printer memory. (See Printer memory.) ● You might be missing a printer message that could help you solve the problem. On the System Setup submenu (on the Configure Device menu) at the printer control panel, temporarily turn the Clearable Warnings and Auto Continue settings off. Then print the job again. The print job is not formatted correctly. Paper is not fed correctly or is damaged. There are print-quality problems. ENWW Troubleshooting flowchart 125