HP 460CB Getting Started Guide - Page 20
Travel tips, Printer buttons and lights - power supply
UPC - 829160849003
View all HP 460CB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Travel tips The following tips will help you prepare for traveling with your printer: • If you are bringing an extra black or photo print cartridge, follow these guidelines: For a partially used black print cartridge, or a partially used or full photo print cartridge, store it in the travel holder to prevent ink leakage. A newly opened black print cartridge will leak slightly at high altitudes (such as in airplanes). To avoid this, wait to install new black cartridges until you reach your destination. Until then, keep them in their original, taped packaging. • Turn off the printer using the power button. This ensures that the print cartridges return to the home position at the left side of the printer and lock in place. • If you need to buy print cartridges while traveling to another country/region, see the online help called "Traveling with your HP mobile printer", available through the Toolbox or HP Printer Utility, for regional cartridge compatibility information. • Use only the power adapter that is supplied with the printer. Do not use any other voltage transformer or converter. The power adapter can be used with AC power sources of 100 to 240 volts, 50 or 60 Hz. • Remove the battery if you will not be using the printer for more than a month. • When traveling with photo paper, pack it flat so it doesn't warp or curl. Photo paper should be flat before printing. If the corners of the photo paper curl more than 10mm (3/8 inch), flatten the paper by putting it in the resealable storage bag, then rolling the bag on a table edge until the paper is flat. Printer buttons and lights The printer lights indicate printer status and are useful for diagnosing printing problems. This chapter provides a list of light status light combinations, what they indicate and how to solve the problem. 1 2 3 4 5 6 7 8 1. (Cancel button) - Cancels the current print job. The 5. Left print cartridge light -Blinks when the left print car- time it takes to cancel depends on the size of the print tridge is absent or improperly functioning. Turns on solid job. Press this button only once to cancel a queued print when the ink is low or empty. job. 6. Right print cartridge light -Blinks when the right print cartridge is absent or improperly functioning. Turns on 2. (Resume button) - Resumes a print job that is wait- solid when the ink is low or empty. ing or after temporary interruption (for example, when adding print media to the printer). 7. (Power button) - Turns the printer off or on. 3. Resume light - Lights up in amber when a print job is 8. Power light - Lights up in green when the printer is waiting, and blinks or turns on to relay status or a need turned on using the AC adapter or a 41-100% charged for intervention (see the table below). battery. When powered by battery, lights up in amber 4. Battery charging light - Lights up in green when the bat- when battery is 10-40% charged, and red when battery tery is charging. is below 10% charged. Blinks during printing. 20