HP 4700 HP Embedded Web Server - User Guide - Page 45
To turn on the AutoSend feature, Enable AutoSend, Send to HP, Apply
View all HP 4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
To turn on the AutoSend feature Use the following procedure to make the AutoSend feature available. 1 Make outgoing e-mail functions available by following the instructions that are listed in this chapter. (For more information, see E-mail Server.) 2 Select the Enable AutoSend check box. 3 Click an option to specify the interval at which you want the product to send the productconfiguration and supplies-usage information to the e-mail recipients (determined in the next step), and then type the number of days, weeks, months, or pages printed. 4 For products with permanent storage devices installed, configure up to 20 destinations, using a semicolon or comma to separate the addresses. (If you do not have a permanent storage device, you can configure one e-mail address.) 5 To send device configuration and supplies status information to HP, select the Send to HP check box. 6 Click Apply. Settings ENWW AutoSend 35