HP 4700n HP Embedded Web Server - User Guide - Page 45
To turn on the AutoSend feature, Enable AutoSend, Send to HP, Apply
UPC - 829160845630
View all HP 4700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
To turn on the AutoSend feature Use the following procedure to make the AutoSend feature available. 1 Make outgoing e-mail functions available by following the instructions that are listed in this chapter. (For more information, see E-mail Server.) 2 Select the Enable AutoSend check box. 3 Click an option to specify the interval at which you want the product to send the productconfiguration and supplies-usage information to the e-mail recipients (determined in the next step), and then type the number of days, weeks, months, or pages printed. 4 For products with permanent storage devices installed, configure up to 20 destinations, using a semicolon or comma to separate the addresses. (If you do not have a permanent storage device, you can configure one e-mail address.) 5 To send device configuration and supplies status information to HP, select the Send to HP check box. 6 Click Apply. Settings ENWW AutoSend 35