HP 515B Illustrated Parts & Service Map: Compaq 515B MT Business PC - Page 2

System Board Standard and Optional Boards System boards (include thermal material and bumpers) 1 System board for use in Compaq 515B Memory modules 2 2 GB, PC3-10600 2 1 GB, PC3-10600 Other boards * HP Wireless 802.11b/g/n WLAN card * 802.11b/g/n WLAN card, for use in ROW * LSI 56K modem, PCIe * ATI Radeon HD5450 graphics card, 1 GB * ATI Radeon HD5450 graphics card, 512 MB * ATI Radeon HD4350 (RV710) PCIe x16 graphics card, 512 MB * GeForce G320, PCIe graphics card, 1 GB * GeForce G315, PCIe graphics card, 512 MB * GeForce G210, PCIe graphics card, 512 MB * Intel Gigabit NIC, includes bracket * HP FireWire IEEE 1394 PCI card, FH * 1394 PCI card, 3 port, FH * Serial port, PCI adapter AMD Athlon II X2 processors with alcohol pad and thermal grease: X4 645, dual core, 2-MB cache, 3.1 GHz X4 640, dual core, 2-MB cache, 3.0 GHz X4 635, dual core, 2-MB cache, 2.9 GHz X4 630, dual core, 2-MB cache, 2.8 GHz X3 450, dual core, 1.5-MB cache, 3.2 GHz X3 445, dual core, 1.5-MB cache, 3.1 GHz X3 440, dual core, 1.5-MB cache, 3.0 GHz, C3 X3 435, dual core, 1.5-MB cache, 2.9 GHz X3 425, dual core, 1.5-MB cache, 2.7 GHz X2 265, dual core, 1-MB cache, 3.3 GHz, C3 X2 260, dual core, 1-MB cache, 3.2 GHz X2 255, dual core, 1-MB cache, 3.1 GHz X2 250, dual core, 1-MB cache, 3.0 GHz X2 245, dual core, 1-MB cache, 2.9 GHz X2 240, dual core, 1-MB cache, 2.8 GHz, C2 X2 220, dual core, 1-MB cache, 2.8 GHz, C3 X2 215, dual core, 1-MB cache, 2.7 GHz AMD Phenom II processors with alcohol pad and thermal grease: X4 955, quad core, 2-MB cache, 3.2 GHz X4 945, quad core, 2-MB cache, 3.0 GHz X4 910, quad core, 2-MB cache, 2.6 GHz X4 820, quad core, 2-MB cache, 2.8 GHz X4 810, quad core, 2-MB cache, 2.6 GHz X3 740, triple core, 1.5-MB cache, 3.0 GHz X2 550, dual core, 1-MB cache, 3.1 GHz AMD Sempron processor with alcohol pad and thermal grease: 145, single core, 1-MB cache, 2.8 GHz 140, single core, 1-MB cache, 2.7 GHz * Not shown 616414-001 576110-001 576109-001 538048-001 498307-001 490689-001 601155-001 617079-001 586750-001 615793-001 617080-001 586382-001 490367-001 515182-001 441448-001 321722-001 628883-001 614516-001 617834-001 586735-001 628882-001 614515-001 617833-001 586733-001 586732-001 628881-001 614513-001 617832-001 584221-001 586731-001 584222-001 611192-001 586730-001 614519-001 586741-001 586740-001 586739-001 586738-001 586737-001 614518-001 611196-001 586742-001 System Board Connectors and Jumpers (position of some untitled components may vary in location) PROCESSOR Processor socket CHASSIS_ Chassis fan connector FAN1 XMM1-2 Memory slots PCI1 PCI slot CPU FAN Fan connector SPDIF_OUT2 S/PDIF connector ATX_POWER 24-pin main power connector F_AUDIO Front panel audio connector SATA0-3 Drive connectors PCIE_X1_2 PCIe x1 slot CMOS+PW CMOS password header PCIE_X1_1 PCIe x1 slot F_PANEL Front I/O connector PCIE 16X PCIe x16 slot F_USB4 Internal USB connector AUDIO External in/out connectors F_USB3 Internal USB connector LAN+USB Stacked network/USB connectors F_USB2 Front I/O connector ATX_CPU 4-pin CPU power connector F_USB1 Front I/O connector USB Stacked USB connectors BATTERY RTC battery socket VGA Monitor connector Diagnostic Beep Codes The Power-On Self-Test (POST) is a series of diagnostic tests that runs automatically when the computer is powered on. If the POST detects an error, this causes an audible beep code to sound. The POST beep codes are not necessarily accompanied by an associated, visible error code or text message. The following table shows the POST beep codes, their meanings, and the recommended actions for solving the problem. Diagnostic Beep Codes Beeps Diagnosis Recommended Action 1 short, 1 long, Bad memory or memory configura- Check that the memory modules 3 sec pause tion error have been installed correctly and that proper modules are used. 2 short, 1 long, No graphics card installed or graph- For systems with a graphics card: 3 sec pause ics card initialization failed. 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card. 3. Replace the system board. For systems with integrated graphics, replace the system board. 3 short, 1 long, CPU configuration error or invalid 3 sec pause CPU detected before graphics card initialized. For systems with a graphics card: 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card. 3. Replace the system board. For systems with integrated graphics, replace the system board. 1 short, 1 sec No legacy floppy drive or optical pause drive found 1. Check cable connections. 2. Run the Setup utility and ensure the device port is enabled. 2 short, 3 sec No floppy diskette or CD found pause 1. Check the type of drive you are using and use the correct media type. 2. Replace the diskette or CD with a new one. 3 short, 3 sec Flashing not ready (missing utility Upgrade the BIOS to proper ver- pause or BIOS image file, etc.) sion. 4 short, 3 sec pause Flashing operation has failed (checksum error, corrupted image, etc.) 1. Verify the correct ROM. 2. Flash the ROM if needed. 3. If an expansion board was recently added, remove it to see if the problem remains. 4. Clear CMOS. 5. If the message disappears, there may be a problem with the expansion card. 6. Replace the system board. 5 short, 3 sec BIOS recovery was successful pause No action required. Compaq 515B, MT 630796-001 page 2