HP 540 HP 540 Notebook PC and HP 541 Notebook PC - Maintenance and Service Gui - Page 63
Display assembly, Speaker see
View all HP 540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Display assembly NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables. Description 14.1-inch, WXGA BrightView display assembly for use with HP 540 models 14.1-inch, WXGA BrightView display assembly for use with HP 541 models Spare part number 500004-001 517616-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 40). 6. Remove the following components: a. Keyboard (see Switch cover and keyboard on page 47) b. Switch cover (see Switch cover and keyboard on page 47) c. Speaker (see Speaker on page 51) d. Display lid switch module (see Display lid switch module on page 52) Remove the display assembly: 1. Close the computer and turn it upside down, with the rear panel toward you. 2. Remove the two slotted Torx ST8M2.5×7.0 screws that secure the display assembly to the computer. Component replacement procedures 53