HP 5500dtn HP Jetdirect Print Servers - Administrator Guide - Page 267
Confirm Wireless Settings, TCP/IP Settings, Finish, HP WPS Assistant Mac OS X 10.1.5 or later.
UPC - 808736122641
View all HP 5500dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
3. In the Confirm Wireless Settings screen, verify your settings. If necessary, click TCP/IP Settings to set your IP address. Some networks may require presetting TCP/IP parameters for network access (for example, to accommodate special DHCP requirements or Access List restrictions). 4. When your HP Jetdirect print server has been configured with your wireless network settings, click Finish. 5. Verify that your printer can communicate on your network. See To Verify the Wireless Network Connection. Be sure to reconfigure your wireless computer so that it can regain access to your network. To install the printer on your wireless computer, see Install the Printer on Your Network Systems. HP WPS Assistant (Mac OS X 10.1.5 or later). This utility allows you to configure an HP Jetdirect wireless print server with a connection to your Mac OS network. To use this utility, the HP Jetdirect wireless print server must be in a factory-default state. Proceed as follows: 1. Insert the CD-ROM into your Mac OS system. 2. Select and open the HPJETDIRECT CD-ROM icon. 3. If provided, read the release notes for updated information. 4. Select and open the HP WPS Assistant folder. 5. Run the HP WPS Assistant utility, then follow the instructions on the screen. Once a wireless connection has been created, you will need to use other utilities (such as the HP LaserJet Utility for Mac OS) to configure and manage your printer for printing. Note Optionally, you may use the embedded Web server to configure a network connection. See Chapter 4. ENWW HP Jetdirect 802.11b Wireless Print Servers 267