HP 625n HP Jetdirect Administrator's Guide - Page 211
Security Settings, Table 9.4
UPC - 882780301252
View all HP 625n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Security Settings Information in this section of the Jetdirect configuration page is described in Table 9.4. Table 9.4 Security Settings (1 of 3) Message 802.1X Admin Password: SSL/TLS Cert Expires: Description Identifies whether the print server has been configured with EAP/802.1X client authentication settings. Specified: 802.1X authentication has been configured. Not Specified: 802.1X authentication has not been configured. Specifies whether an IP Administrator password has been configured on the print server. This password is shared by Telnet, the embedded Web server, and HP Web Jetadmin to control access to print server configuration parameters. Up to 16 case-sensitive, alphanumeric characters can be used. Not Set: An Administrator password has not been set. Set: An Administrator password has been set. (The password may be cleared from the print server through a cold reset.) Status of Secure Sockets Layer/Transport Layer Security (SSL/TLS) protocols. Disabled: SSL/TLS is disabled. : A character string that identifies the certificate common name. Specifies the expiration date of the digital certificate for SSL/TLS encrypted security. The date is in UTC format (for example, "2002-10-02 12:45 UTC"). Not Applicable: Displayed if a digital certificate has not been installed. ENWW HP Jetdirect Configuration Page 211