HP 6400/8400 HP StorageWorks Enterprise Virtual Array Release Notes (XCS 09531 - Page 8
Supported Fibre Channel switches, Supported disks, Performance sizing, Workarounds
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NOTE: 1 Gb path and components have specific configuration requirements. For more information on configuration requirements and support for 2 Gb and 4 Gb EVAs, see the HP StorageWorks SAN Design Reference Guide, which can be downloaded from the following website: http://www.hp.com/support/manuals Click Storage Networking under Storage, and then select HP StorageWorks SAN under HP StorageWorks SAN Solutions. Supported Fibre Channel switches For complete information on which Fibre Channel switches are supported, see the Single Point of Connectivity Knowledge (SPOCK) at: http://www.hp.com/storage/spock. You must log in to access SPOCK. If you do not already have an account, select Register to log in on the main page and follow the instructions. Supported disks For information about disk drive support, see HP StorageWorks Enterprise Virtual Array disk drive firmware support, available on the HP Manuals website: http://www.hp.com/support/manuals. Under storage, click Disk Storage Systems, and then select the appropriate array model under EVA Disk Arrays. Performance sizing To configure an EVA for the intended disk model(s) and host I/O workoads, please contact your HP account support representative for consulting services and instructions. For additional information on performance and solutions, see the following HP websites: • http://h18006.www1.hp.com/storage/arraywhitepapers.html • http://h18006.www1.hp.com/storage/whitepapers.html Workarounds This section identifies important notes and workarounds for the EVA4400, EVA6400, and EVA8400. If you encounter difficulties with the workarounds, contact HP Services for assistance. Hardware and controller software EVA4400 port does not log in to the embedded switch It has been observed that an EVA4400 host port will occasionally not log in to the embedded switch. If you encounter this issue, restart the controller to bring the port online. 8