HP 6530b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 80
Heat sink, that secure the heat sink clip to the heat
UPC - 884420682875
View all HP 6530b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Heat sink NOTE: The heat sink spare part kits include replacement thermal material. Description For use only with HP Compaq 6535b computer models For use only with HP Compaq 6530b computer models Spare part number 488315-001 486289-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the keyboard (see Keyboard on page 63). 6. Remove the fan (see Fan on page 68). Remove the heat sink: NOTE: Steps 1 through 4 apply only to HP Compaq 6530b computer models. See steps 5 through 8 for removing the heat sink on HP Compaq 6535b computer models. 1. Loosen the two Phillips PM2.0×4.0 captive screws (1) that secure the heat sink clip to the heat sink. 2. Remove the heat sink clip (2) by sliding it to the right, and then lifting it up. 3. Lift the right side of the heat sink (1) until it releases from the system board components. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 70 Chapter 4 Removal and replacement procedures