HP 6535b Memory Modules - Windows Vista and Windows XP - Page 12
Replace the keyboard, of the memory module, until the retention clips snap into place.
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. Insert a memory module: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module and do not bend the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 13. Replace the keyboard (1). 14. Slide the 4 keyboard release latches (2) to lock the keyboard. 15. Turn the computer upside down on a flat surface. 6 Adding or replacing memory modules ENWW