HP 6720t HP Compaq 6720t Mobile Thin Cleint PC - Maintenance and Service Guide - Page 71
Diagnostics menu, System Configuration menu - hard drive
UPC - 883585721658
View all HP 6720t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Diagnostics menu Select Memory Check To do this Run a comprehensive test on system memory. System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language (or press f2) Boot Options Device Configurations Built-In Device Options Port Options To do this Change the Computer Setup language. ● Set an f9, f10, and f12 delay when starting up. ● Enable/disable CD-ROM boot. ● Enable/disable floppy boot. ● Enable/disable internal network adapter boot and set the boot mode (PXE). ● Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. ● Set the Express Boot Popup delay in seconds. ● Set the boot order. ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. ● Enable/disable embedded WLAN Device Radio. ● Network Interface Controller (LAN). ● LAN/WAN switching. ● Enable/disable Wake on LAN. ● Enable/disable the optical disc drive. ● Enable/disable the USB port. ● Enable/disable the PC Card slot. Computer Setup menus 63