HP 710c (English) Windows Users Guide - C5894-60003 - Page 75
Customer Care Web site at, maintenance - ink for deskjet
View all HP 710c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
d. Hold the print cartridge up to the light to inspect for fibers on the face and edges. If fibers are still present, repeat steps 2b and 2c. e. Repeat steps 2a through 2d with the other print cartridge using a clean, moistened cotton swab to avoid any contamination. Ẇ Clean the print cartridge cradle a. Position yourself at eye level with the printer. b. Locate the cradle that holds the print cartridges. c. Using clean, moistened swabs, wipe the underside of each wall of the carriage where fibers may collect and come in contact with the paper. Repeat until no ink residue is seen on a clean swab. ẇ Reinstall the print cartridges a. Reinstall the print cartridges and close the printer's top cover. b. Reinsert the power cord into the back of the printer. c. Go to the Printer Services tab of the HP Toolbox and click Print a self-test page. d. Examine the printout for ink streaking. NOTE This procedure should remove all fibers that would cause ink to streak on a printout. However, fibers can be missed. If the printout still shows streaking, repeat the procedure until the test printout is clear and sharp. This procedure and additional maintenance tips are located on the HP Customer Care Web site at http://www.deskjet-support.com/ maintenance. 54