Home » HP Manuals » Inkjet Printers » HP 722c » Manual Viewer

HP 722c (English) Setup Guide - C5870-90005 - Page 5

Plug in Your, Printer

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

STEP 3 Plug in Your Printer 1 Lift the cable access door and plug the power adapter cord ﬁrmly into the connector. 1 Power adapter cord 2 Power adapter 3 Electrical outlet 2 Plug the appropriate end of the power cord into the power adapter. 3 Plug the other end of the power cord into an electrical outlet.

Section	Page
Seven	1
Simple Steps	1
to Setting Up	1
Your Printer	1
HP DeskJet	1
720C Series Printer	1
Congratulations on the purchase of your HP DeskJet...	2
ere’s what comes in the box. If anything’s missing...	2
Unpack Your Printer	3
1 Remove the packing tape from the outside of the ...	3
2 Open the top cover and remove the plastic packin...	3
Connect Your Printer to Your Computer	4
1 Make sure the computer is turned off.	4
2 Lift the cable access door on the back of the pr...	4
3 Plug the end of the cable with the notches into ...	4
4 Plug the other end into the computer, and tighte...	4
Plug in Your Printer	5
1 Lift the cable access door and plug the power ad...	5
2 Plug the appropriate end of the power cord into ...	5
3 Plug the other end of the power cord into an ele...	5
Insert the Print Cartridges	6
1 Press the Power button to turn on your printer.	6
2 Open the top cover.	6
3 Carefully remove the protective vinyl tape from ...	6
4 For each print cartridge, lift the green cradle ...	7
5 Close the printer cover.	7
Load Paper in Your Printer	8
1 Pull out the IN drawer and slide the green paper...	8
2 Load the paper in the IN drawer.	8
3 Move the paper adjusters in again to fit snugly ...	9
Install the Printer Software	10
1 Make sure your computer is fully set up and oper...	10
2 Check that the printer is properly set up and re...	10
3 Make sure that the printer is directly connected...	10
4 Make sure the computer and printer are turned on...	10
5 Close any screen savers, virus protection progra...	10
Installing the Printer Software from CD-ROM (recom...	10
Installing the Printer Software from Disk	10
Windows 95 or Windows NT 4.0	11
1 Insert the CD-ROM or disk 1 into your computer’s...	11
2 Click Start on the task bar, and then click Run....	11
3 Type the letter of the computer’s drive (usually...	11
4 Follow the directions on the computer screen.	11
5 When the Installation is done, take the disk out...	11
If you have Windows 3.1x	12
1 Insert the CD-ROM or disk 1 into your computer’s...	12
2 In the Program Manager, click File, and then cli...	12
3 Type the letter of the computer’s drive (usually...	12
4 Follow the directions on the computer screen.	12
5 When the installation is done, take the disk out...	12
If You’re Printing from DOS	12
If you have problems installing	13
1 Make sure your printer is on and all connections...	13
2 Click the Retry button in the message box.	13
3 Exit your software program and turn off the comp...	13
4 Close any screen saver or other software program...	13
5 Try the installation process again. If you’re us...	13
6 If the No Communication message appears again, “...	13
Align the Print Cartridges	14
1 Be sure there’s paper in the printer’s IN drawer...	14
2 Double-click the HP Toolbox icon on the computer...	14
3 Click the Printer Services tab, then click Align...	14
Print a Page	15
1 On the Printer Services tab of the HP Toolbox, c...	15
2 Check out the results!	15
Extended Warranty Options	16