HP 7310 Network Guide - Page 28
Miscellaneous, Automatic, Not applicable, <MAC address>, Parameter, Description
View all HP 7310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
(continued) ● Automatic: AES or TKIP is in use. ● Not applicable: this parameter does not apply to this network type. WEP aims to provide security by encrypting data over radio waves so that it is protected as it is transmitted from one end point to another. This security method is common on wireless networks. Access Point HW The hardware address of the access point on the network to which the Address HP all-in-one is connected: ● : the unique MAC (media access control) hardware address of the access point. ● Not applicable: this parameter does not apply to this network type. Miscellaneous The following table describes the data transmission and receipt information shown on the network configuration page. Parameter Total Packets transmitted Total Packets received Description The number of packets transmitted by the HP all-in-one without error since it has been turned on. The counter clears after the HP all-in-one is turned off. When a message is transmitted over a packet-switching network, it is broken up into packets. Each packet contains the destination address as well as the data. The number of packets received by the HP all-in-one without error since it has been turned on. The counter clears after the HP all-in-one is turned off. HP all-in-one Network Guide 25