HP 8/80 Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010) - Page 146
BL-1034, Probable Cause, Recommended, Action, systemVerification, diagPost, Severity, Message
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
7 BL-1034 Probable Cause Indicates that the system has timed out while waiting for disable messages from the user ports after disabling the ports. Recommended Action Restart or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message persists, replace the blade. Refer to the Fabric OS Command Reference for more information on the systemVerification command. Severity CRITICAL BL-1034 Message , [BL-1034], ,, INFO, , Slot FC Initialization completed. Probable Cause Indicates that the slot has completed initializing Fibre Channel (FC) ports. Recommended No action is required. Action Severity INFO BL-1035 Message , [BL-1035], ,, INFO, , Slot iSCSI port Initialization completed. Probable Cause Indicates that the slot has completed initializing the specified iSCSI port. Recommended No action is required. Action Severity INFO BL-1036 Message , [BL-1036], ,, CRITICAL, , Faulting 8G blade in slot = due to incompatible stag mode. All EX/VEX ports must be disabled in order to enable the 8G blade in the chassis. Probable Cause Indicates that the FOS 6.0, 8G blade with legacy mode (EX_port having stag) will be disabled. Recommended Disable all EX/VEX ports and perform a slotpoweroff or slotpoweron operation on the 8G blade. Action Also, all EX/VEX ports can be re-enabled now. Severity CRITICAL 70 Fabric OS Message Reference 53-1001767-01