HP 8000dn HP LaserJet Printer Family - Print Media Specification Guide - Page 16
Property, Specifications, emissions when heated to 205° C 401° F for 0.1 second 0.2 second - laserjet
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Property Basis weight Specifications 64 g/m2 to 105 g/m2 (17 lb to 28 lb). See the support documentation that came with your printer for specific information. Caliper 0.09 mm to 0.17 mm (3.5 mil to 6.5 mil). See the support documentation that came with your printer for specific information. Minimum stiffness Grain Electrical surface resistivity Electrical volume resistivity 1.2 minimum (Taber) machine direction. 0.8 minimum (Taber) cross direction. Portrait feeding: long grain up to 135 g/m2 (36 lb); short grain for weights greater than 135 g/m2. Landscape feeding: long grain. 109 to 1013 ohms/square. 109 to 1014 ohms - cm. Surface roughness 100 to 190 Sheffield optimal; Up to 350 Sheffield extended (fusing or feeding performance can be degraded at outer ranges). Fusing compatibility Must not scorch, melt, ignite, offset materials, or release undesirable emissions when heated to 205° C (401° F) for 0.1 second (0.2 second for HP color LaserJet printers). Furnish (composition) 100 percent chemical pulp and/or cotton content; recycled paper with up to 5 percent groundwood can be used. Dimensional accuracy Cut sheet within ±0.80 mm (±0.03 inch) of nominal. Cut edge quality Cuts must be smooth and clean with no fray or edge roll. Curl Must lie flat within 5 mm (0.2 inch). Moisture content 4 percent to 6 percent by weight. Packaging Moisture-proof ream wrap. Wax pick 12 minimum (Dennison). 10 Using print media ENWW