HP 8000dn HP PCL/PJL reference - PCL 5 Comparison Guide - Page 50
HP LaserJet IIISi Printer, Table 2-1. PCL Feature Additions for HP LaserJet IIISi Printer, Feature
UPC - 088698569634
View all HP 8000dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
HP LaserJet IIISi Printer Several new PCL features were added to the PCL 5 language with the release of the HP LaserJet IIISi printer. These new features are summarized in Table 2-1 below. Table 2-1. PCL Feature Additions for HP LaserJet IIISi Printer Feature Number of Copies Page Size Output Bin Selection Command End Raster Graphics Command Job Separation Fonts Status Comments Modified Greater range, 1 to 32,767. Modified C5 Envelopes not supported. New Allows programmatic selection of upper or lower output paper bins. New/Modified Modified version of the existing End Raster Graphics command. New Command Causes the paper stacker to shift positions to offset the output paper stack. New Additions Four variations of Univers Condensed; ITC Zapf Dingbats in five symbol sets. HP LaserJet IIIP Printer Several new PCL features were added to the PCL 5 language with the release of the HP LaserJet IIIP printer. These new features are summarized in Table 2-2. One new feature listed here is adaptive compression (method 5) for the Raster Compression Mode command. In addition to compressing data for transmission, if certain rules are followed (discussed below), the HP LaserJet IIIP printer will store adaptive compressed data in compressed format and only decompress it when required for printing. There are certain requirements which must be met for this data to be stored in compressed format. These requirements are discussed following Table 2-2. 2-2 Printer-Specific Differences ENWW