HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 247
Problem Solving, Correcting Output Quality Problems, Problems with the Optional 5-bin Mailbox with Stapler
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Chapter 5 Problem Solving 247 Problems with the Optional 5-bin Mailbox with Stapler Situation Solution The job was not stapled. Jobs sent to the stapler might not be stapled for one or more of the following reasons: z The wrong size or type of paper was used for the job. z More than 20 pages were sent to the stapler, exceeding its capacity. z The stapler has bent or broken staples in the stapling bed. (See page 194.) z A staple jam was recently cleared (up to 2 following jobs might not be stapled). z The job was sent to a bin other than the stapler bin because the wrong size or type of paper was used for the job. z One-page jobs will not be stapled. z The interface cable between the mailbox and the stapler unit may be defective or not connected properly. General repeated stapler z Check to see that the job to be stapled is less than 2 mm jam problems. thick. z Stapler may have some trapped staple wires that are obstructing the magazine. Remove loose staples and paper dust from the inside of the stapler (page 194). Correcting Output Quality Problems