HP 840c (English) Macintosh Connect * User's Guide - C6419-90001 - Page 34
Using and Caring for Your Print Cartridges, Do - ink cartridges
View all HP 840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 Using and Caring for Your Print Cartridges To replace a print cartridge: 1 Press the Power Button to turn on the printer. The print cartridges move. 2 Unplug the power cord from the back of the printer. 3 Open the top cover and raise the cradle latch. 4 Lift the print cartridge out of the cradle and discard it. 6410908 Warning Keep print cartridges out of the reach of children. 5 Remove the replacement print cartridge from its packaging and carefully remove the protective vinyl tape. Do NOT touch the ink nozzles Remove the protective vinyl tape Do NOT touch or remove the copper contacts Warning Do NOT touch the print cartridge ink nozzles or copper contacts. Touching these parts will result in clogs, ink failure, and bad electrical connection. Also, do NOT remove the copper strips; these are required electrical contacts. 6 Push the print cartridge firmly, straight down into the print cartridge cradle. 7 Close the cradle latch. When the latch is fully closed, you will hear a click. 8 Load plain white paper in the IN tray. 9 Plug in the power cord in the back of the printer. 10 Close the top cover. 11 If the Print Cartridge Status Light continues to blink after you install the new print cartridge, check the part number on the print cartridge to ensure you installed the correct one. 27