HP 9000 Model D200 HP Firmware Manager User's Guide - Page 13
Updating Firmware Using HP OS Initiated Firmware Manager, Updating Firmware on an HP-UX System
View all HP 9000 Model D200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 Updating Firmware Using HP OS Initiated Firmware Manager Downloading an HP OS-Initiated Firmware manager (OSIFM) firmware package downloads a file that contains a firmware release in a patch or product for HP-UX or a Smart Component for Linux or Windows. This chapter addresses the following topics: • Updating firmware on an HP-UX System • Updating firmware on a Linux System • Updating firmware on a Windows System Updating Firmware on an HP-UX System Downloading an HP OSIFM firmware package on a system running the HP-UX operating system downloads a file that contains the firmware package in either a patch or a product, depending on the type of system: • A patch or product for an entry-class system • A product for a mid-range or high-end system To determine if the firmware package is in a patch or product, see the release notes for a firmware package. This section describes how to update firmware on an entry-class, mid-range, or high-end system running the HP-UX operating system. It describes the following tasks: • Tasks to perform before updating firmware • Upgrading firmware on an entry-class system • Upgrading firmware on a mid-range or high-end system • Verifying the firmware update For procedures on how to downgrade or reinstall firmware, see the firmware package release notes. Before Updating Firmware The following lists tasks that you must complete before updating firmware on a system running the HP-UX operating system: • Perform all the tasks listed in the prerequisites section in the firmware releases notes. For information on obtaining release notes for a firmware package, see step 7 in Downloading Firmware Packages. • Schedule a time to update firmware when it is convenient to reboot the system. • Review the HP Support Line User Guide or the HP support terms and conditions for precautions, scope of license, restrictions, and limitation of liability and warranties. • Do not update firmware during an operating system installation, update-UX, or dynamic root disk session. • Do not update firmware on the iLO Management Processor over the network while updating system firmware. • Back up the system. For additional information, see the administration guide that came with the operating system. • For entry-class systems, clear the system event logs. Follow these steps to clear the system event logs: 1. Establish a telnet session with the iLO Management Processor (MP). 2. Log in to the iLO Management Processor as an administrator. Updating Firmware on an HP-UX System 13