HP 9000 rp3410 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 40

Powering Off the Server Manually, for standby power is still present in the server.

Get HP 9000 rp3410 PDF manuals and user guides View all HP 9000 rp3410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

3. To enable command mode, enter CM. 4. To use the remote power control command, enter PC. 5. Enter OFF to power off the server, and enter YES when prompted to confirm the action. IMPORTANT: The main DC voltage is now removed from the system; however, AC voltage for standby power is still present in the server. 6. Unplug all the power cables from the receptacles on the rear panel of the server. Powering Off the Server Manually To manually power off the server, follow these steps: 1. Gracefully shut down the operating system. 2. Press the Power button to power off the server. IMPORTANT: The main DC voltage is now removed from the system; however, AC voltage for standby power is still present in the server. 3. Unplug all the power cables from the receptacles on the rear panel of the server. 40 Overview

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
3.
To enable command mode, enter
CM
.
4.
To use the remote power control command, enter
PC
.
5.
Enter
OFF
to power off the server, and enter
YES
when prompted to confirm the action.
IMPORTANT:
The main DC voltage is now removed from the system; however, AC voltage
for standby power is still present in the server.
6.
Unplug all the power cables from the receptacles on the rear panel of the server.
Powering Off the Server Manually
To manually power off the server, follow these steps:
1.
Gracefully shut down the operating system.
2.
Press the Power button to power off the server.
IMPORTANT:
The main DC voltage is now removed from the system; however, AC voltage
for standby power is still present in the server.
3.
Unplug all the power cables from the receptacles on the rear panel of the server.
40
Overview