HP 9000 rp4410-4 Read Me First, Second Edition: Before Removing or Replacing P
HP 9000 rp4410-4 Manual
View all HP 9000 rp4410-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 9000 rp4410-4 manual content summary:
- HP 9000 rp4410-4 | Read Me First, Second Edition: Before Removing or Replacing P - Page 1
-X cards is not yet enabled on your hp 9000 rp4440 server. If you wish to add, remove, or replace a PCI/PCI-X card, read the complete instructions in your Operation and Maintenance Guide on the enclosed Documentation CD before attempting this procedure. HP-UX Update Patches Hewlett Packard PA-8800 - HP 9000 rp4410-4 | Read Me First, Second Edition: Before Removing or Replacing P - Page 2
). Web Site Help For the latest information on HP-UX patches, check the HP IT Resource Center at http://itrc.hp.com. Your hp 9000 rp4440 Does Not Use 900MHz Processors Your hp 9000 rp4440 Server does not use 900MHz processors. Your HP Server was shipped with either a 800MHz or a 1GHz processor
v2
Printed in the U.S.A.
READ ME FIRST Before Removing or Replacing PCI/PCI-X Cards
The hot-plug capability for removing and replacing PCI/PCI-X cards is not yet enabled on your hp 9000
rp4440 server. If you wish to add, remove, or replace a PCI/PCI-X card, read the complete instructions in your
Operation and Maintenance Guide
on the enclosed
Documentation CD
before attempting this procedure.
HP-UX Update Patches
Hewlett Packard PA-8800 based servers and workstations require the December 2003 (or later) release of the
following bundles and individual patches:
HP-UX 11i (11.11) OE bundles
•
HWEnable11i patch bundle
•
Updated driver bundles
•
OnlineDiags bundle
Additional Individual Patches
•
PHCO_29327 11.11 cumulative SAM patch
—Fix SAM operation with OLAR and Attention Buttons (Doorbells).
•
PHCO_29944 11.11 hotplugd(1M) daemon for doorbell enablement
—OLAR and Attention Buttons (Doorbells) support for rp4440 server.
•
PHNE_29947: 11.11 IETHER 1000Base-SX/T cumul. patch
—Fixes GigEthernet LAN swinstall from server on different subnet.
•
PHKL_30100 11.11 Psets, vPar, Xserver, T600 HPMC, KRNG, early LPMC
—Corrects LPMC and interrupt handling during early boot process.
•
PHSS_30101 Support Tool Manager Dec 2003
—Correct the handling of noncritical LPMC errors and other events.
•
PHKL_30105 11.11 remove mem module and LPMC syslog msgs
—Remove noncritical messages from
dmesg
buffer and
syslog
.