Home » HP Manuals » Servers » HP 9000 rp7440 » Manual Viewer

HP 9000 rp7440 LIFT-O-FLEX® 17000 SP 400 Manual - Page 12

Lift-O-Flex, SP 400 Manual, Enclosures

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Lift-O-Flex 17000 SP 400 Manual 4. Enclosures 4.1 Electrical wiring 4.1.1 Wiring for Intermediate Member with brake motor Motor Motor Brake Plug Page 11 Rev July 01

Section	Page
Lift-O-Flex™ 17000 SP 400 Manual	2
TABLE OF CONTENTS	2
Lift-O-Flex 17000 SP 400 Manual	3
LIFT-O-FLEX 17000 SP 400	3
LIFT-O-FLEX®	3
NOTE: It is important that you read and fully understand this manual before using your Lift-O- Flex Lifter. If you have any questions contact your distributor or the manufacturer.	3
GENERAL DATA	3
GOOD WORKING ENVIRONMENT	3
FLEXIBLE	3
Lift-O-Flex 17000 SP 400 Manual	4
Abuse and/or careless operation will void the warranty.	4
Lift-O-Flex 17000 SP 400 Manual	5
Assembly instructions	5
Lift-O-Flex 17000 SP 400 Manual	6
Operating instructions	8
Note: Due to the worldwide disbursement of lifters, one of three (3) types of chargers will be delivered with each lifter in order to meet the various power requirements utilized.	8
North America: 17136-110VAC/18VDC with standard US plug. Europe: 17134- 230VAC/ 18VDC with 2 prong European plug. Pacific Rim: 17082- 100- 240VAC/ 18VDC with standard US Plug.	8
The European charger may require a plug adapter to fit countries wall socket. The Pacific Rim charger will require a pigtail adapter from standard US plugto plug to fit countries wall socket.	8
Adapter plugs to fit chargers for wall sockets are the responsibility of Hewlett-Packard.	8
Lift-O-Flex 17000 SP 400 Manual	9
Important! The maximum lift capacity is limited to 400lb. The lifter is not to be used for personnel transportation.	9
The end-effector should always to be lowered to the lowest possible position before moving the	9
lifter.	9
Lift-O-Flex 17000 SP 400 Manual	10
RONI, LLC	10
The lifter does not run at all.	10
The end-effector cannot be lowered or raised but the motor runs.	10
The end-effector moves at a slower speed than normal	10
When lifting there is a strange sound and/ or the lifter operates differently than usual.	10
Lift-O-Flex 17000 SP 400 Manual	11
Do not use a high-pressure hose. It	11
could damage both the electronics as well as the chassis.	11
The batteries cannot be \	11
Every 6 month maintenance	11
Lift-O-Flex 17000 SP 400 Manual	12
Enclosures	12