HP 914c HP iPAQ Trip Guide (UK) - Page 79
Enable Safety Cameras
View all HP 914c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Speeding tolerance HP iPAQ Trip Guide will warn you when you exceed the speed limit by the amount specified here. Select whether you want to specify the tolerance as a Fixed value (offset to the speed limit) or as a Percentage. The slider will change depending on which mode you have chosen. Both positive and negative values can be given in either offset or percentage mode. Alternative speed limit If the speed limit of the current road segment equals or is above this limit, the speed warning will use the alternative tolerance instead of the previous one. Move the slider to its rightmost position to turn off the alternative speed warning. Then the settings of the upper slider will determine the warning for all roads. Alternative speeding tolerance If the speed limit of the current road reaches the value set at Alternative speed limit, this setting will replace the basic one set at the top of this screen. The slider and the selector work exactly as the basic ones (Page 79). Example: to let you better understand how this feature works, here is an example. If you use the settings +10 km/h - 100 km/h - +5%, HP iPAQ Trip Guide will warn you when driving at the following speeds: Speed limit 40 km/h 60 km/h 90 km/h 100 km/h 120 km/h 160 km/h Warning at 50 km/h 70 km/h 100 km/h 105 km/h 126 km/h 168 km/h (=40 km/h + 10 km/h) (=60 km/h + 10 km/h) (=90 km/h + 10 km/h) (=100 km/h + 5%) (=120 km/h + 5%) (=160 km/h + 5%) Enable Safety Cameras HP iPAQ Trip Guide can warn you when you approach known speed and red light cameras previously uploaded or copied into the device, or saved manually in the 79