HP A6530f Advanced Setup Guide - Page 42
Audio card: See Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio
UPC - 883585957477
View all HP A6530f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
To connect digital audio, your computer must include a Digital Audio Out connector on either the audio card or the back panel. You must connect multichannel speaker outputs if you connect the digital output. To connect digital audio speakers: 1 Turn off the computer. 2 Connect the orange Digital Audio Out connector on the back panel of your computer to the digital input (S/PDIF) on the digital speakers or a digital audio system. 3 Turn on the computer. NOTE: Always turn on the computer before the speaker system. 4 Connect the speaker system to the power. 5 Turn on the speaker system. 6 After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See "Configuring Speaker and Sound Options" in the Getting Started guide. Audio card with digital output and type 3 connectors: See "Configuring speakers with Realtek HD Audio Manager" in the Getting Started guide. Follow the instructions to enable digital audio output. Audio card with digital output and type 6 connectors: See "Configuring speakers with Realtek HD Audio Manager" in the Getting Started guide. By default, digital audio output is already enabled. Audio card: See "Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio card" in the Getting Started guide. Follow the instructions to enable digital audio output. 36 Advanced Setup Guide (features vary by model)