HP A7533A HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 20 - Page 279

Table 70 HP StorageWorks enterprise-class platform terminology and abbreviations (continued) Blade name Abbrev. Blade ID (slotsh ow) Definition 48-port 8-Gb/s Port Blade HP 51 StorageW orks SAN Director 48 Port 8Gb FC Blade 6-port 10-Gb/s Port Blade HP 39 StorageW orks SAN Director 6 Port 10Gb FC Blade Fibre Channel Router Blade B-Series 24 Multi-Proto col Router Blade A 48-port HP StorageWorks Platform Port Blade supporting 1, 2, 4, and 8 Gb/s port speeds. HP StorageWorks SAN Director 48 Port 8Gb FC Blade support only F_Ports and E_Ports; FL_Ports are not supported. This port blade is compatible only with the HP StorageWorks DC SAN Backbone Director CP Blades. HP StorageWorks SAN Director 48 Port 8Gb FC Blades do not support FL_Ports. A 6-port HP StorageWorks Platform Port Blade supporting 10 Gb/s port speed. Blade provides 10-Gb/s ISLs. This port blade is compatible only with the HP StorageWorks 4/256 SAN Director CP Blades (using chassis configuration option 5) and the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch CP Blades. A 16-port Fibre Channel Routing and FCIP Blade that also has 2 GbE ports and is compatible only with the HP StorageWorks 4/256 SAN Director (using chassis configuration option 5) and the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch CP Blades. iSCSI Bridge Blade Fibre Channel Application Blade HP 31 StorageW orks B-Series iSCSI Director Blade FA4-18 33 An iSCSI bridge Blade that enables bridging of iSCSI hosts to Fibre Channel fabrics. It has 8 Fibre Channel optical SFP ports and 8 GbE copper RJ-45 ports. This blade is currently compatible with the HP StorageWorks 4/256 SAN Director CP Blades (using chassis configuration option 5). An application blade that has 16 (1-, 2-, and 4-Gb/s) ports supporting Fibre Channel Application Services and 2-10/100/1000 BaseT Ethernet copper interfaces supporting blade management. HP Encryption Blade FC8-18 43 An application blade that provides high performance 32 port auto-sensing 8 Gb/s Fibre Channel connectivity with data cryptographic (encryption/decryption) and data compression capabilities. CP blades The HP StorageWorks 4/256 SAN Director supports the CP4 blade. The HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch support the CP8 blades. The CP blades in the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director Switch are hot-swappable. When the CPs from an HP StorageWorks DC SAN Backbone Director are inserted into an HP StorageWorks DC04 SAN Director Switch, the switch type changes. The same is true when inserting a CP blade from an HP StorageWorks DC04 SAN Director Switch into an HP StorageWorks DC SAN Backbone Director. When a CP blade with a Fabric OS of pre-6.2.0 is inserted into an HP StorageWorks DC04 SAN Director Switch, the blade becomes faulty. You can correct this by upgrading the firmware on the CP blade in an HP StorageWorks DC SAN Backbone Director or HP StorageWorks DC04 SAN Director Switch chassis using the firmwareDownload command. Fabric OS 6.2 administrator guide 277