HP AD510A HP StorageWorks 1500 Modular Smart Array installation guide (355901 - Page 82
Updating MSA controller firmware (if necessary), Configuring the storage, Entering controller settings
UPC - 829160218625
View all HP AD510A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Updating MSA controller firmware (if necessary) If you need to update the firmware on your MSA controller to a version downloaded from the MSA1500 website, do so at this time. For information on determining whether you need to update MSA controller firmware, see the following sections in this guide: • "Determine which version of MSA controller firmware to use" on page 15 • "Obtain desired controller firmware and Support Software CD versions" on page 56 For instructions on updating MSA controller firmware, see the MSA 1000/1500 firmware updating guide, available on the MSA1500 website: http://www.hp.com/go/msa1500cs. IMPORTANT: After updating MSA controller firmware, be sure to check the status of the MSA for unexpected issues. Verify the status of the connections, defined profile types, redundancy settings, and storage configuration. Configuring the storage Thorough planning is critical to the successful and efficient deployment of any storage array system. As discussed in Chapter 1: "Installation procedures-All deployments" on page 13, plans should include decisions about total system capacity, fault-tolerance levels (availability), and performance. Although detailed in the ACU and the CLI user guides, basic configuration tasks include (in the following sequence): • Creating the arrays (LUNs). • Entering controller settings, such as setting the read/write cache ratio, setting the rebuild/expand priority, and setting the redundancy level. • Identifying the operating system type (also called Host Mode, Access Mode, Profile, or Connection Profile) of each HBA with access to the MSA. This ensures that the MSA will communicate properly with that host. • Verifying that each HBA with access to the MSA is visible to the MSA. • Entering Selective Storage Presentation options (also called Access Control Lists) to isolate the storage from unauthorized access. These settings indicate, by HBA, which LUNs the HBA can access. 82 Configuration procedures-OpenVMS environments