HP AE370A HP StorageWorks Fabric OS 6.2.0a release notes (5697-7963, March 200 - Page 25

GigE ports interface GigE ports route Non-local switch ports display in zoning tree Port Admin Module > GigE tab Configure > FCIP tunnel Port Admin Module > GigE tab Configure > FCIP tunnel Zone Admin Admin Domain Switch Admin > DCC policies Performance Monitoring Configure > Zoning In Web Tools, non-local switch port id/WWN can be added using text box. Remove Offline or inaccessible Devices Zone Admin Configure > Zoning Replace/Replace All zone members by selecting the offline devices from the zone tree. Offline devices have an unknown overlay badge with good visibility. Zone database summary ping Zone Admin Configure > Zoning Zoning report for both online and offline database Zoning Fabric OS 6.2.0 fixes The following table lists defects closed in the Fabric OS 6.2.0 firmware release. Table 7 Fabric OS 6.2.0 closed defects Closed defect summary Solution Add Member button is disabled while creating a new TI Zone when the switch is in VF mode. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Add Other Port button can be used to add ports.Tthis is available in the ADD TI Zone window. Under stress testing, cfgsave takes a long time and fails to propagate on 64 VE-VE FCIP tunnel 33 switch core-edge topology running I/O. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Wait until fabric is not saturated to push configs around. Adding a B-Seies switch with conflicting domain ID into an EOS fabric may cause another switch to segment. Fixed in Fabric OS 6.2.0. Workaround prior to upgrade: Check the domain ID before adding a switch to any fabric. USB port LED of HP StorageWorks DC SAN Backbone Director CP blade stays ON after HA failover. Fixed in Fabric OS 6.2.0. CUP Port stuck in Contingent Allegiance State after z9 Host IPL. Fixed in Fabric OS 6.2.0. HP StorageWorks Fabric OS 6.2.0a release notes 25