HP AJ765A HP RDX Removable Disk Backup System Firmware 2040 and 3040 release n - Page 4

Prerequisites None Installation instructions 1. Your current CD many not contain the latest revision of the RDX Utility. Download the latest version of the HP RDX Utility, version 2.20 (HP RDX Tools 1.44) or later, from http://www.hp.com/ support/rdx. 2. The latest firmware versions are: Products All external models • AJ766A • AJ768A • 487769-001 (FRU) All internal models • AJ765A • AJ767A • AP724A • AP725A • AP726A • 487768-001 (FRU) Firmware revision Firmware file name 2040 2040_USB_External_HP.bip 3040 3040_USB_Internal_HP.bip 3. Launch the RDXUtility program located under Start -> All Programs -> HP RDX. 4. Select (highlight) the RDX device in the main window. 5. Click Diagnostic to open the Diagnostic window. 6. Click Change Firmware... and browse to the desired firmware file (.bip). Once selected, the RDX Utility validates that the file selected is in fact RDX code for the unit being upgraded and loads the new code file on the RDX drive. If a cartridge is installed, the drive ejects it and shuts down the cartridge interface prior to loading the new code. This guarantees that no data is corrupted during the code load. After the new code is loaded, the RDX dock resets itself and begins running the new code. Compatibility/Interoperability None Determining current version You can check your current firmware revision from the HP RDX Utility's Diagnostic window, as described above. 4