HP All-in-One 200-5110 Upgrade and Service - Page 41
Replacing Memory, Install the memory modules into the blue sockets
![]() |
View all HP All-in-One 200-5110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
20 Touching only the top edge of the memory module, lift it out of the socket. Replacing Memory IMPORTANT: The new (replacement) part may not look the same as the original part, due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. NOTE: Install the memory modules into the blue sockets first, starting with the largest capacity module placed in the socket closest to the processor on the motherboard. 1 Touching only the top edge of the memory module, locate the notch on the bottom edge. NOTE: Each type of memory has a different notch position. Incompatible memory modules cannot be installed in the memory socket. 2 Look at the memory module socket for the tab that matches the notch on the memory module. 537500-001 - Removing and Replacing Memory 7
![](/manual_guide/products/hewlettpackard-e9260f-upgrade-service-418385c/41.png)