HP Armada 1700 Compaq Armada 1700 Series Reference Guide - Page 118
Entering the Power-On Password, click Set.
View all HP Armada 1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
To establish your power-on password in Windows NT, do the following: 1. Run Computer Setup by turning on or restarting the computer (Start Æ Shut Down ÆRestart). When the blinking cursor appears in the upper-right corner of the screen, press F10. 2. Click the System Features icon Æ Security Management menu. 3. Under Power-On Password, click Set. 4. Enter your power-on password. (You can use up to eight alphanumeric characters, and you may use the same password you are using for the setup password.) IMPORTANT: Type carefully, because the password is not displayed as you type. The password is not case sensitive. However, you must use the same keys each time you enter the password. For example, the numbers at the top of the keyboard are not recognized as being the same as the numbers in the embedded numeric keypad. 5. Enter the password again to verify it. 6. If you want to require entry of a password whenever the computer is turned on, click Enable Password to Power-On. 7. Click OK Æ Exit Æ Save. Once the power-on password is set, you must enter it every time you turn on or restart the computer, or resume from Hibernation, Suspend, or QuickLock/QuickBlank. Entering the Power-On Password 1. Turn on or restart the computer. 2. At the password prompt, type your power-on password. If you enter the password incorrectly, an incorrect password prompt displays. Try again to enter the password. After three unsuccessful attempts, you must turn the computer off and back on again before you can continue. NOTE: The password is not case sensitive. However, you must use the same keys each time you enter the password. For example, the numbers at the top of the keyboard are not recognized as being the same as the numbers in the embedded numeric keypad. Security Features 13-5