HP BL680c HP ProLiant BL680c Generation 5 Server Blade Maintenance and Service - Page 37
System board
UPC - 884420396314
View all HP BL680c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury: • Do not attempt to recharge the battery. • Do not expose the battery to temperatures higher than 60°C (140°F). • Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. • Replace only with the spare designated for this product. To remove the component: 1. Power down the server blade (on page 23). 2. Remove the server blade (on page 23). 3. Remove the access panel ("Access panel" on page 24). 4. Remove the battery pack ("HP Smart Array P400i Controller battery pack" on page 28). 5. Disconnect the battery pack cable from the FBDIMM baffle. 6. Remove the FBDIMM baffle ("FBDIMM baffles" on page 25). 7. Identify the battery location ("System board components" on page 48). 8. Remove the battery. IMPORTANT: Replacing the system board battery resets the system ROM to its default configuration. After replacing the battery, reconfigure the system through RBSU. To replace the component, reverse the removal procedure. System board To remove the component: 1. Power down the server blade (on page 23). 2. Remove the server blade (on page 23). 3. Remove all hard drives ("Hard drive" on page 26). Removal and replacement procedures 37