Home » HP Manuals » Servers » HP BL860c » Manual Viewer

HP BL860c HP Smart Array Controllers for Integrity Servers User Guide - Page 14

SAS cable part numbers, Power up the enclosure.

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

3. Connect the other end of the cable to the SAS input connector of the external storage enclosure: o If the enclosure uses a standard SAS 4x connector, insert the cable connector into the enclosure connector, and then tighten the lock screws on the cable connector. o If the enclosure uses a mini SAS 4x connector, pull back the tab on the cable connector, insert the cable connector into the enclosure connector, and then release the tab. 4. Power up the enclosure. 5. Power up the server. SAS cable part numbers To order additional cables, use the option kit part number. Approximate cable length 1 m (3 ft) 2 m (6 ft) - 4 m (13 ft) - 6 m (20 ft) - Type of cable Mini SAS 4x to standard SAS 4x Mini SAS 4x to mini SAS 4x Mini SAS 4x to standard SAS 4x Mini SAS 4x to mini SAS 4x Mini SAS 4x to standard SAS 4x Mini SAS 4x to mini SAS 4x Mini SAS 4x to standard SAS 4x Option kit part number 419570-B21 407339-B21 419571-B21 432238-B21 419572-B21 432239-B21 419573-B21 Cable assembly number 408908-002 407344-003 408908-003 407344-004 408908-004 407344-005 408908-005 Installing the controller hardware 14

Section	Page
HP Smart Array Controllers for HP Integrity Servers User Guide	1
Notice	2
Contents	3
Hardware features	5
E500 model	5
P700m model	6
P800 model	6
Summary of controller features and capabilities	7
Features common to all controller models	7
Model-specific features	8
HP Smart Array E500 Controller features	8
HP Smart Array P700m Controller features	8
HP Smart Array P800 Controller features	9
Overview of the installation procedure	10
Quick installation procedure (Windows or Linux)	10
Installing the controller hardware	12
Preparing the server	12
Installing the controller board	12
Connecting storage devices	13
Connecting internal storage	13
Connecting external storage	13
SAS cable part numbers	14
Updating the firmware	15
Methods for updating the firmware (Windows or Linux)	15
Configuring an array	16
Utilities available for configuring an array	16
Comparing the utilities	16
Using ORCA	17
Using ACU	18
Installing device drivers and Management Agents	19
Systems using Microsoft Windows	19
Installing device drivers	19
Installing the Event Notification Service	19
Installing Management Agents	19
Systems using Linux	19
Installing Management Agents	20
Upgrading or replacing controller options	21
Replacing the E500 cache	21
Replacing the P700m cache battery	21
Replacing a P800 cache battery	24
Replacing the P800 cache module or controller	29
Replacing, moving, or adding hard drives	32
Identifying the status of a hard drive	32
Recognizing hard drive failure	33
Effects of a hard drive failure	34
Compromised fault tolerance	34
Recovering from compromised fault tolerance	34
Replacing hard drives	35
Factors to consider before replacing hard drives	35
Automatic data recovery (rebuild)	36
Time required for a rebuild	36
Abnormal termination of a rebuild	37
Upgrading hard drive capacity	38
Moving drives and arrays	38
Adding drives	39
Diagnosing array problems	41
Controller board runtime LEDs	41
Runtime LEDs for E500 model	41
Runtime LEDs for P700m model	42
Runtime LEDs for P800 model	43
Battery pack LEDs	44
Diagnostic tools	45
Electrostatic discharge	47
Preventing electrostatic discharge	47
Grounding methods to prevent electrostatic discharge	47
Regulatory compliance notices	48
Federal Communications Commission notice	48
FCC rating label	48
Class A equipment	48
Class B equipment	48
Declaration of conformity for products marked with the FCC logo, United States only	49
Modifications	49
Cables	49
Canadian notice (Avis Canadien)	49
European Union regulatory notice	50
BSMI notice	50
Chinese notice	50
Japanese notice	51
Korean notice	51
Battery replacement notice	51
Taiwan battery recycling notice	52
Acronyms and abbreviations	53