HP BLc3000 Full-Height Blade Blank and Device Bay Shelf Installation Instructi - Page 1
HP BLc3000 Manual
View all HP BLc3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Full-Height Blade Blank and Device Bay Shelf Installation Instructions for HP BladeSystem c-Class Enclosures Creating a full-height device bay blank 1. Obtain the coupler plate: o If you are using a device bay blank that shipped with the enclosure, the coupler plate is in the full-height device shipping box. o If you are using a device bay blank that you purchased as an option, remove the coupler plate from inside the blank. 2. Fit the coupler plate in to the slots on top of the blank, and slide the coupler plate back until it snaps into place. 3. Fit the slots on the bottom of the second blank on to the tabs on the coupler plate, and slide the second blank forward until it snaps in place. c3000 Enclosure: 2. Unlock the shelf locking tab. c7000 Enclosure: c7000 Enclosure: c3000 Enclosure: 4. Install the full-height blank in to the device bay. Removing a device bay shelf 1. Remove the blank. c7000 Enclosure: c3000 Enclosure: 4. Remove the shelf from the enclosure. c7000 Enclosure: © Copyright 2006, 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part Number 411763-003 February 2010 (Third Edition) 3. Disengage the shelf from the enclosure.