HP Bc1500 CCI Network Considerations Guide - Page 19
HP BladeSystem PC Blade Switch
![]() |
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
6. To verify that the SNMP traps are available and enabled in HP SIM: • In HP SIM, select Options > Events > SNMP Trap Settings. • Verify that the newly registered MIB file RADLAN-MIB.mib is in the Mib Name box. NOTE: By default, the traps in this MIB may not be enabled for trap handling and severity because the level is not configured. Review each trap and configure Enable Trap Handling and Severity based on business requirements. HP SIM 5.0.1 and earlier For HP SIM to properly receive traps, you must manually install the HP PC Blade Switch-specific MIB and one of its dependent MIBs. The following steps explain the MIB installation and registration process. 1. In HP SIM, select Options > Manage System Types. 2. Click New. 3. For the System object identifier, click Retrieve from system. 4. Set the Community string (for example, public). 5. Direct the target host name or IP address to the management address of the HP PC Blade Switch. 6. Click Get response. The Response value contains the results. 7. Click OK. Notice that the System object identifier field is populated. 8. Select the System type: (for example, to Switch) 9. Set the Product model to HP BladeSystem PC Blade Switch. 10. Click OK. To create a configuration file: 1. From the HP SIM server, open a DOS command prompt window. 2. Change the current working directory to the HP SIM MIBS folder, which by default is c:\Program Files\HP\Systems Insight Manager\mibs. 3. Copy the following files to HP SIM MIBS folder: RADLAN-MIB.mib snmpv2-smi-v1.mib snmpv2-tc-v1.mib 4. At the DOS prompt, execute the command: mcompile RADLAN-MIB.mib 5. Verify that the "MIB Compilation completed successfully" message displays. 19
![](/manual_guide/products/hewlettpackard-bc1500-cci-network-considerations-guide-d874149/19.png)