HP Brio 80xx HP BRIO PC - Online Reference Guide, Not Orderable - Page 40
Installing Main Memory Modules
View all HP Brio 80xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3 Upgrading and Adding Accessories Upgrading Hardware Installing Main Memory Modules 1 Remove the computer's cover (refer to "Removing the Cover" on page 37). 2 On a table top turn the computer on to its side, with the system board closest to the surface of the table top. Caution Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. 3 Handle the memory module by its edges. Slide the memory module into the connector at 90o to the system board (the module will only fit into the socket one way round). 4 Firmly press the memory module completely into the connector until the retaining clips click into position. System Board Retaining Clips 5 If you need to remove a memory module, perhaps because you are replacing an existing module, refer to "Removing a Memory Module" below. 40