HP Brocade BladeSystem 4/24 Brocade OS Command Reference Manual Supporting Fab - Page 459
To con an FCIP Tunnel 1 with FICON XRC and FICON Tape Write, Pipelining Emulation features
View all HP Brocade BladeSystem 4/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 459 highlights
portCfg 2 To modify an existing FCIP tunnel with VLAN tagging: switch:admin> portcfg fciptunnel8/ge0 modify 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100 To create an IP interface using IPv4: switch:admin> portcfg ipif 4/ge0 create 192.168.100.50 255.255.255.0 1500 Operation Succeeded To create an IP interface using IPv6 with prefix: switch:admin> portcfg ipif 8/ge0 create 2000::800:3333:1234/64 Operation Succeeded To create a static IP route using IPv4: switch:admin> portcfg iproute ge0 create 172.16.123.231.255.255.0.0 192.168.255.25 1 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute 8/ge0 create 3000:4444:800::3456/64 1080::8:800:200C:1234 To create a mirror port: switch:admin> portcfg mirrorport 2/4 --enable Please confirm enable of Mirror Port (Y,y,N,n): [n] y To configure a range of ports as RSCN suppressed: switch:admin> portcfg rscnsupr 2/4-7 --enable To add an entry to the VLAN tag table. switch:admin> portcfg vlantag8/ge0 add 192.168.10.1 100 3 To delete the entry from the VLAN tag table. switch:admin> portcfg vlantag8/ge0 delete 192.168.10.1 100 To configure an FCIP Tunnel 1 with FICON XRC and FICON Tape Write Pipelining Emulation features enabled using all default parameter arguments: switch:admin> portcfg ficon ge0 1 -x 1 -w 1 To configure FTRACE with ACo disabled and FTRACE enabled on port ge0/tunnel 3: switch:admin> portcfg ftrace ge0 3 cfg -a 0 -e 1 -p 5 -s 00000003 -t ffffffff To delete the FTRACE on the same port/tunnel: switch:admin> portcfg ftrace ge0 3 del See Also portCfgShow, portCmd, portShow, switchShow, configure, fastWriteCfg Fabric OS Command Reference 433 53-1000599-01