HP Business Inkjet 2200/2250 HP Business InkJet 2200/2250 Printer - (English) - Page 10

2. Insert the Starter CD into your CD-ROM drive. The installation program runs automatically. If the installation program does not run automatically, click Start, select Run, and at the command line box, type the letter of your computer's CD-ROM drive followed by: \SETUP (for example, type D:\SETUP). 3. Click Install Printer Driver from the Starter CD menu. 4. Select the language of the printer software that you want to install and click OK. 5. Click Next and then click Accept to accept the terms of the license agreement. 6. Select Connected via the network. 7. Select Client Setup if the printer is connected to a server or someone's machine. Select Server or Peer-to-Peer Setup if you are setting up a print server for the first time, or if you will print directly to HP JetDirect EIO print server installed in your printer. If you are not sure how to connect your network printer, ask your network administrator, or see the next section, Network Printing for more information. Setting Up Your Printer on a Macintosh Computer Connect your printer to a Macintosh computer via an HP JetDirect print server. Before connecting your printer to the JetDirect server, make sure your printer is an: • HP Business Inkjet 2250 printer with an HP JetDirect card, or • HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit upgrade and an HP JetDirect card. These cards can be purchased as accessories (see HP Supplies and Accessories for more information). 1. Connect the Ethernet cable to the printer and the JetDirect server. 3-3