HP C3982A Service Manual - Page 58
Removing the DC Controller Assemblies
View all HP C3982A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
HP LaserJet 5P Printer Service Supplement Removal and Replacement Removing the DC Controller Assemblies The DC Controller Assembly is located on the bottom of the printer. The PCA is protected by a metal shield assembly, and is mounted to a plastic base. The Formatter PCA and Fusing Assemblies are connected directly into the DC Controller and must be removed prior to removal of the DC Controller Assembly. Caution Failure to remove these components before removing the DC Controller will result in printer damage. 1. Remove the printer covers (page 39), Formatter PCA and Shield (page 48), and Fusing Assemblies (page 50). 2. On the right side, remove the machine screw and washer (Figure 25) holding the grounding spring in place. (Callout 1 in Figure 25). 3. Disconnect the two cables to the tray 1 assembly (callout 2 in Figure 25). 51