HP C4110A HP LaserJet 5000, 5000 N, and 5000 GN Printers - Getting Started Gui - Page 19
Step 9. Attach Power Cord
![]() |
UPC - 088698190142
View all HP C4110A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Step 9. Attach Power Cord 1 Locate the power switch on the right side of the printer. Make sure the printer is turned off. 2 Connect the power cord to the printer and a grounded power strip or an AC outlet. 3 Turn the printer on. 4 After the printer warms up, the READY message should appear on the control panel display and the Ready light should remain on. If the READY message does not appear, see the problem solving chapter in the printer user's guide. READY 16 Getting Started Guide EN
![](/manual_guide/products/hewlettpackard-c4110a-hp-laserjet-5000-5000-n-5000-gn-printers-getting-started-guide-0434b69/19.png)
16
Getting Started Guide
EN
Step 9. Attach Power Cord
1
Locate the power switch on the right
side of the printer. Make sure the
printer is turned off.
2
Connect the power cord to the
printer and a grounded power strip
or an AC outlet.
3
Turn the printer on.
4
After the printer warms up, the
READY
message should appear on
the control panel display and the
Ready light should remain on. If the
READY
message does not appear,
see the problem solving chapter in
the
printer user’s guide.
READY